Switch and color temperature controller warm/cold CCT for installation in an aluminum profile.
Supply voltage:
12-24 V DC /constant voltage e.g. from a LED lamp power supply/
Output voltage:
12-24 V DC with PWM pulse width modulation
State after power failure:
off
Maximum power of controlled lamps:
2 x 60 W
Maximum current output:
2 x 5 A
Purpose:
multicolor CCT strips (cold white/warm white)
Type of sensor:
Capacitive.The sensor's sensitivity field is a few cm from the spring placed between the printed circuit board (PCB) and the profile cover. We ensure effectiveness for LED power supplies without grounding - that is, in protection class II or III against electric shock.
Operating temperature:
between -10°C and + 40°C
Main design features:
The device takes the form of a printed circuit board (PCB) measuring 10x80mmallowing placement in the aluminum profile between the LED strip and the power supply. The soldered springs, a few cm high, should be covered by the profile cover and represent the point of maximum sensitivity of the system. The board has a contact area allowing the soldering of connection wires.
Safety class:
Class III
Declarations:
RoHS, CE
Warranty:
2 years
The device is designed for turning on, turning off, and changing the color temperature of LED lighting in the CCT system. It can be used in an aluminum profile covered by a cover. The switch is invisible from the outside of the housing.
Principle of operation:
Bringing a hand close within a few cm of the sensor causes it to switch states on/off. Holding the hand longer will cause dimming or changing the LED light. The operation and readiness of the device is indicated by a white LED.
