ProVero under-cabinet switch with dimmer
Input voltage:
12V/24V DC
Output voltage:
12V/24V DC with PWM pulse width regulation
State after power failure:
off
Maximum power of controlled lamps:
60W at 12V; 100W at 24V
Maximum current output:
5A at 12V; 4A at 24V
Dimming range:
about 50% of maximum brightness.
Type of sensor:
capacitive
Sensor works through:
furniture boards, wood, glass, marble /maximum material thickness about 38 mm/.
Operating temperature:
between -10°C and + 40°C
Wires:
2x1000mm wire terminated with JST mini
Main design features:
plastic housing in the shape of a disc with a diameter of 50mm and a height of 7mm, mounting with double-sided adhesive tape
Degree of protection:
IP20
Declarations:
RoHS, CE
Warranty:
2 years
The device is intended forturning on, turning off, and changing the brightnessof LED lighting. It can be appliedon the invisible side of the furniture boardto control light functions. The switch glued under the furniture boardwill remain invisible.Touch is detected up to a maximumthickness of the board 38 mm(depending on the density of the board).
Control method:
Bringing a handwithin a few cm of the sensor causes it to switch states on/off.Holding the hand longerwill cause dimming or brightening of the LED light.
