UNIVERSAL RECEIVER VOLTA PROVERO
- RGB/RGBW/CCT/DIM 4*4A controller
Input voltage:
12 V – 24 V DC from the LED strip power supply with voltage stabilization
Max output current:
4*4Aper channel
Output power:
total of channels:192W for 12V or 384W for 24V
Connections to the installation:
Terminal block for “+” and “-” on DC power and 5-wire on LED output - common anode V+, R, G, B, W. C-MOS output transistors in open-drain configuration.
Communication method with the remote:
RF 2.4GHz radio channel. The set of controller + remote must be paired according to the instructions before use.
Radio communication range:
about 20 metersfrom the remote control in open terrain
Brightness adjustment method:
PWM. Pulse width modulation 2 kHz
Memory of previous settings:
YES
Operating temperature:
From -20°C to + 45°C
Receiver dimensions:
70 x 40 x 20 mm light plastic housing.
Wireless receiver Voltais a device designed to work withRGB, RGBW, CCT LED strips and single-color strips.The operating mode is set using jumpers. The controller operateswithin the range of 12-24V DC, the maximum power must not exceed4A per channel.
The controller operates wirelessly in dynamic and static synchronization mode. The controller is operated using dedicated Volta remotes:
Receiver functions:
- single color – dimming
- CW+WW – adjustment of white light temperature from warm to cold
- RGB – color selection from three primary colors
- RGBW – color selection from 3 primary colors and cold white
- 5 fixed brightness levels: 10%, 30%, 50%, 70%, 100% in static mode. Selected with dedicated buttons
- brightening / dimming in 1024 levels with each press, also in fast mode
- ability to select programmed dynamic transitions and adjust the response speed to buttons
- ability to adjust the speed of dynamic transitions
- night mode – lighting with brightness from 1 to 10%. Night mode can be set
The VOLTA system allows synchronization with controllers from other lighting groups. Wireless-sync-controlled.
/VOLTA system - graphics/
The set is NOT factory paired. Please follow the pairing instructions provided below.
