VOLTA universal receiver 4*6ARGB/RGBW/CCT/DIM

Kategorie: LED control \ Controllers for RGB/RGBW/CCT

Ceny

Ceny i stany dostępne po zalogowaniu

Dane

Symbol

ID-2510

Kod kreskowy

5901874273918

JednostkaPodstawowa

szt.

VOLTA universal receiver 4*6ARGB/RGBW/CCT/DIM

Załączniki

id-2510-instrukcja

id-2510-instrukcja-pilot

id-2510-ostrzezenia-dotyczace-bezpieczenstwa

id-2510-parowanie_volta

Opis

UNIVERSAL RECEIVER VOLTA PROVERO
- RGB/RGBW/CCT/DIM 4*6A controller

Input voltage:

12 V – 24 V DC from the LED strip power supply with voltage stabilization

Max output current:

4*6Aper channel

Output power:

total of channels:288W for 12V

Connections to the installation:

Terminal block for “+” and “-” on DC power supply and 5-wire on LED output - common anode V+, R, G, B, W. C-MOS output transistors in open-drain configuration.

Communication method with the remote:

RF 2.4GHz radio channel. The set of controller + remote must be paired before use according to the instructions.

Radio communication range:

about 20 metersfrom the remote control in open terrain

Brightness adjustment method:

PWM. Pulse width modulation 2 kHz

Memory of previous settings:

YES

Operating temperature:

From -20°C to + 45°C

Receiver dimensions:

160 x 46 x 25 mm bright plastic housing.

Weight:

115g

Warranty:

3 years

Certificates:

CE, RoHS

Volta receiveris a device designed to work withRGB, RGBW, CCT LED strips as well as with single-color strips.The operating mode is set using jumpers. The controller operatesin the range of 12-24V DC, the maximum power cannot exceed6A per channel.

The controller operates wirelessly in dynamic and static synchronization mode. The controller is operated using dedicated Volta remotes:

Receiver functions:

single color – dimming
CW+WW – adjustment of white light temperature from warm to cool
RGB – color selection from three primary colors
RGBW – color selection from 3 primary colors and cool white
5 preset brightness levels: 10%, 30%, 50%, 70%, 100% in static mode. Selected with dedicated buttons
brightening / dimming in 1024 levels with each press, also in fast mode
ability to select programmed dynamic transitions and adjust the response speed to buttons
ability to adjust the speed of dynamic transitions
night mode – lighting with brightness from 1 to 10%. Night mode can be set

The VOLTA system allows synchronization with controllers from other lighting groups. Wireless-sync-controlled.
/VOLTA system - graphic/

The set is NOT factory paired. Please follow the pairing instructions provided below.

Specification:
Operating temperature: -20-60 Power supply voltage: DC12~24V
Output: 4*CMOS Control method: common anode
Maximum load: 6A/color Dimensions: L160*W46*H25 mm
Net weight: 115g Wireless synchronization system
PWM modulation frequency: 2KHz RF: 2.4GHz
The controller operates wirelessly in dynamic and static synchronization mode.
The controller is dedicated to work with VOLTA series remotes ID-2500, ID-2501.
This is a universal controller, depending on the jumper settings we can use it for single-color, RGB, CCT, and RGBW strips.

Dołożyliśmy wszelkich starań, aby powyższe dane były poprawne, jednak nie gwarantujemy, że publikowane informacje nie zawierają błędów, które nie mogą jednak stanowić podstawy do jakichkolwiek roszczeń.